The workarounds for this blue screen of death are quite straightforward. We will check the memory for any problems. If none are detected, we will shift our attention to the drivers installed on your computer. If even that doesn’t work, we will inspect the hardware and then proceed with a clean install of Windows on your computer.
Solution 1: Running Memory Diagnostics
Like mentioned before, this error is usually directly related to the memory modules installed on your computer. They can either be corrupt or may not be functioning properly with problems in the memory storage or access. We will run Microsoft’s tool “Windows memory diagnostics” which will check for errors and inform you if any. Note: There are were several cases where the RAM modules were not installed properly in the computer. Check if the modules are fully placed inside the slot with the ‘clicking’ sound you hear. Also, try changing the slots of RAM and see if this does the trick.
Note: You can also try running ‘memtest86’ and leave it overnight after downloading it from the web.
Solution 2: Updating problematic driver
In case a driver is mentioned in your error logs which caused the blue screen or you installed a recent Windows update which updated one, you can try updating the driver manually. Drivers can also cause the blue screen under discussion and there were many users who reported that updating the drivers fixed the problem for them.
In addition to the above solutions, you can also try the following:
Checking for any recent hardware installed on your computer. If any was, disconnect it and try booting the computer again.Check your memory modules on another system and see if they work properly there. If they don’t, take them to a technician or to the store if you have a warranty.Make sure your hard drive is running perfectly and there are no discrepancies present.Check for any problematic software. These include software which ‘optimize’ your PC experience by manipulating memory.Disable all sorts of overclocking activities on both your processor and GPU.If all the solutions don’t work, it is worth a try backing up all the data and installing a clean version of Windows.
FIX: Steps to Fix BSOD Error “KERNEL_DATA_INPAGE_ERROR"FIX: KERNEL_SECURITY_CHECK_FAILURE BSOD in Windows 10Fix: DRIVER_OVERRAN_STACK_BUFFER BSOD on Windows 10How to Fix “KERNAL_DATA_INPAGE_ERROR” BSOD on Windows?
